A heavy-duty universal absorbent roll that soaks up oil, fuel, coolant, water and solvents from one product. At 40 cm 50 m and 4 mm thick, this dimpled polypropylene roll holds over 120 litres, letting you tear off exactly what you need for anything from a drip tray liner to a full workshop spill. Non-toxic, chemically inert and classified non-hazardous for transport.

One Roll for Every Fluid

Unlike oil-only absorbents that repel water, this universal grade is treated to take both hydrocarbon and water-based fluids, petrol, diesel, hydraulic oil, coolant, antifreeze, acetone, xylene and vegetable oil alike. One product on the shelf instead of three, and no guessing which roll to grab when something goes on the floor.

Heavy-Duty Capacity, Used Only Where You Need It

Rated heavy grade with a capacity of over 120 litres per roll, the 4 mm dimpled construction draws fluid in fast and holds it without falling apart underfoot. Rolling it out means you use the length the job actually needs, which works out far more economical than pads for larger spills or run-off areas.

Ready When It Matters

Keep it in the workshop, the service truck, the plant room or alongside bulk fluid storage so a spill can be contained straight away rather than spread. Fast containment protects staff from slip hazards, keeps contaminants out of drains and helps you meet your workplace spill-response obligations.

Key Features

• Universal absorbent handles oil, fuel, coolant, water and solvents
• Over 120 litres absorbent capacity per roll
• Heavy-grade 4 mm construction that holds together when saturated
• Dimpled surface for fast wicking and even absorption
• 50 metre roll tear off only what the job needs
• Non-toxic, chemically inert polypropylene with no hazardous components
• Classified non-dangerous for transport when unsaturated

Applications

• Workshop and service bay floor spills
• Drip containment under machinery, presses and hydraulic equipment
• Bulk fluid storage, decanting and dispensing areas
• Service vehicles, plant rooms and mobile maintenance kits
• Spill kit refills and general absorbent stock

Absorbs

• Engine and hydraulic oils
• Petrol, diesel and fuels
• Coolant and antifreeze
• Water and water-based fluids
• Solvents including acetone and xylene
• Vegetable oils and similar semi-liquids

Safety and Disposal

Keep dry and away from heat sources above 160 C and open flame. Once saturated, dispose of the roll according to local regulations for the absorbed product the waste classification follows the fluid, not the absorbent.