Rust is the enemy of any good paint job and this 4-in-1 rust protection spray paint sorts it in one hit. Primer, active rust protection, high-coverage colour and a tough protective topcoat, all in the one can. Better yet, you can spray it straight over existing rust or old paint, so there's no mucking around with three different products and a weekend of prep.

Whether you're touching up the chassis, bringing a classic back to life, prepping the 4x4 or just stopping a bit of surface rust before it spreads, it dries fast, grips just about any surface, and leaves a clean satin finish that won't yellow or fade in the Aussie sun.

Why you'll like it

• Four jobs, one can: primer, rust protection, colour and a protective sealant in a single satin spray
• Less prep: goes straight over sound rust and old paint
• Sticks to nearly anything: steel, untreated and galvanised metal, aluminium, copper, brass, timber, stone, fibreglass and even glass
• Fast drying: dust-dry in about 10 minutes, so you're not standing around
• Tough satin finish that's UV-resistant and won't go yellow
• Built for the elements: weather and water resistant, and impact resistant once fully cured
• Even, clean coverage thanks to a wide-angle nozzle that sprays horizontally or vertically
• Handles the heat up to +80 C

The technical bit

• Finish: Satin (gloss level 30 40 GE at 60 , per DIN 67530)
• Coverage: Roughly 1.5 2.0 m per 400 ml, depending on the surface
• Drying (at 20 C, 50% humidity): dust-dry in 10 min, touch-dry in 20 min, ready to recoat after 12 hrs
• Heat resistance: Up to +80 C
• Binder base: Nitrocombination